Home / Collections / Ajax / Ajax Wireless FireProtect Plus with Carbon Oxide Detector Black

Ajax Wireless FireProtect Plus with Carbon Oxide Detector Black

R 1,907.00 Incl. VAT
| /

Ajax Wireless FireProtect Plus with Carbon Oxide Detector Black

R 1,907.00 Incl. VAT
| /


Product Code: 8218.16.BL1

The Ajax FireProtect Plus with a built in carbon oxide detector is a wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.

  • Authentication to prevent forgery
  • Jamming detection and communication channels encryption
  • Tampering alarm

The device registers smoke, sharp jumps in temperature, and dangerous CO levels

It can operate independently from Ajax Hub, notifying of danger by means of a built-in siren

The device independently tests the smoke chamber and gives prompt notification of the need to dust

Principle of operation

The device detects smoke by means of a camera with a photoelectric sensor. An additional chemical element detects carbon oxide and raises the alarm.



It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.


Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.


Tech specs


Radio channel smoke detector with temperature sensor and built-in siren

Type of detector


Installation method



Operates only with 

Ajax HubAjax Hub PlusAjax ReX, Ajax ocBridge Plus and Ajax uartBridge

Sensing element

Photoelectric, CO and temperature sensors

Activation threshold

+54°С to +65°С

Type of notification


Volume of built-in siren

85 dB

Alarm signal delivery time

0.15 s

False alarm filter


Interconnected alarms


Power supply

Battery: Two CR2 batteries

Power supply voltage: 3 V

Battery life — up to 4 years

Backup power supply: battery CR2032

Jeweller radio technology

Communication range with central unit — up to 1,300 m in an open space

Two-way communication between devices

Operating frequencies — 868.0-868.6 MHz

Self-adjusting RF output power — up to 20 mW

Block encryption based on AES algorithm

Detector polling period — 12−300 s

Additional temperature sensor


Operating temperature range

From 0°С to +65°С

Permissible humidity

Up to 80%


Protection against fraud

Jamming detection


Remote setting and testing



132х132×31 mm


220 g


EN 14604


Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.

Complete set

FireProtect Plus detector

SmartBracket mounting panel

2 x CR2 batteries (pre-installed)

1 x backup battery CR2032 (pre-installed)

Installation set

User’s guide