The Centurion D2 Turbo Sliding Gate Operator kit includes the Centurion D2 Turbo Motor, 2 x Centurion Nova 4 Button remote controls, 12v 7.2Amp Securi Prod backup battery, 4 meter rack (8 x 500mm interlocking Raz Rack), Centurion Photon II semi-wireless safety gate beam and a Centurion Anti Theft Bracket with a 60mm discuss padlock. The Centurion D2 gate motor is fast, reliable and affordable. The Centurion D2 Gate Motor has an exceptional speed of 400mm per second and boasts with a powerful peak push force of 9kgf. The D2 Motor is quick and easy to install and set up, with all settings easily configurable via two dials on the controller. With loads of features, the Centurion D2 Turbo is the complete motor for a standard domestic gate of four meters in length and not weighing more than 250kg.  

FEATURES
• Turbo speed opens and closes the gate quicker and reduces security risks.
• Very easy to install and user friendly set up, saving you time and money.
• Reliable battery backup will allow the gate to operate in the event of a power outage.
• Built in multichannel Centurion receiver. Compatible remotes are Nova 1 Button, 2 Button and 4 Button remotes.
• Multiple Modes of Operation.
• Adaptive Collision Sensing.
• Maintenance is effortless and convenient as modular components clip together.
• Lockable with easy manual override.
• Robust steel pinion allows for easy retro-fitting and ensures reliable operation.

Product type	Sliding Gate Motor
Model	Centurion D2 Turbo
Input voltage	90V - 240V AC ± 10%, 50Hz
Motor voltage	12V DC
Motor power supply	Battery-driven (standard capacity - 12V 5Ah)
Battery backup	Securi Prod 12V 7.2Amp
Rack	4 meters (8 x 500mm interlocking Raz Rack)
Anti Theft bracket	Centurion Stainless Steel Anti Theft Bracket
Anti Theft bracket lock	60mm discuss padlock
Safety gate beam	Centurion Photon II semi wireless
Current consumption (mains)	Intergral with controller 1A @ 13.7V ± 1%
Current consumption (rated load)	8/12A
Current consumption (quiescent load)	95mA
Operator push force - starting	18kgf
Operating push force - rated	8kgf
Gate mass - maximum	250kg
Gate length	20m
Gate speed - m/min	22 - 26m/min
Gate speed - mm/sec	367 - 433mm/sec
Drive pinion	17T Module 4
Maximum daily cycle	10 cycles/day
Design life	30 000 cycles
Collision sensing	Electronic
Operating temperature	-15°C to 50°C
Degree of protection	IP54
Controller incorporated	D2 Controller_H
Onboard receiver type	Nova code-hopping onboard, multichannel
Receiver frequency	433.92MHz
Receiver code storage capacity	32 transmitter buttons
Dimensions - motor	244mm(l) x 170mm(w) x 310mm(h)
Dimensions - battery incl. terminals	151mm(l) x 65mm(w) x 101mm(h)
Dimensions - raz rack single	500mm(l) x 30mm(w) x 53mm(h) x 8
Dimensions - safety beam receiver	50mm(l) x 40mm(w) x 130mm(h)
Dimensions - safety beam transmitter	50mm(l) x 40mm(w) x 130mm(h)
Dimensions - remotes	59mm(l) x 35mm(w) x 16mm(h) x 2
Dimensions - anti theft bracket	215mm(l) x 150mm(w) x 350mm(h)
Dimensions - discus lock	60mm(l) x 25mm(w) x 60mm(h)
Dimensions - packaging	380mm(l) x 370mm(w) x 520mm(h)
Mass of kit packed	12.5kg
Warranty	24 Month carry in Manufacturers warranty excluding battery and lock. Refer to returns policy i.t.o battery and lock

INSTRUCTIONS FOR USE
• Refer to detailed installer manual.

MAINTENANCE AND CARE
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or Gateshox run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock as well as the discuss lock for the Anti Theft bracket and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.

WARNINGS AND LIMITATIONS
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.

WARRANTY
• 24 Month Carry-in Product Manufacturers warranty. The D2 Motor can be registered online at CentSys.co.za for warranty purposes.

WHAT’S IN THE BOX
1 X Centurion D2 Motor
1 x Securi-Prod 12v 7.2Amp Battery
2 x Centurion Nova 4 Button remotes
1 x Centurion D2 controller – Inside motor
1 x Origin Marker
1 x Base plate
1 x Pack of mounting screws, nuts, washers and bolts 

1 x 4 meter rack (8 x 500mm interlocking Raz Rack)

1 x Centurion Photon II semi wireless safety gate beam

1 x Centurion D2 Stainless Steel Anti-Theft Bracket

1 x 60mm discuss padlock with 2 keys