PRODUCT INFORMATION
The Takex FS-100E Battery Operated Ultraviolet Flame Sensor With Built-in Sounder is a high sensitivity ultraviolet flame sensor, designed to quickly detect ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.
The flame sensor can be operated for approximately 2 years with good quality type-AA alkaline batteries.
Due to the easy separation of the sensor unit and the base unit it is very easy to install and maintain.
Please note: It does not detect smoke or heat. It is not a re-preventing device.
Product Code: FS-1000E
FEATURES OF THE HIGH SENSITIVITY UV FLAME SENSOR:
- High sensitivity ultraviolet flame sensor
- Detachable base unit with snap-in-out sensor design
- Built-in sounder
- NO/NC relay output
- Adjustable response time
- Battery (2 x AA type-3 alkaline) or DC operation
SPECIFICATIONS OF THE HIGH SENSITIVITY UV FLAME SENSOR:
| Detection system | Ultraviolet rays detection (Detected wave length 180~260nm) |
| Coverage | Distance - 10m (7cm lighter flame, in front) |
| Angle - Approx. 120° conically | |
| Supply voltage | Type-AA alkaline battery (LR6) 2pcs / DC3V |
| External wiring DC9 ～ 30V (Polarized) | |
| Current consumption | Stand by - 50μA Max. when battery power supply, 5mA Max. when external power supply |
| Alarm - 50mA Max. when buzzer sounds | |
| Alarm output | NPN open collector output |
| (Useful as an output with voltage when external power is used) | |
| 30V (DC) 50mA, off-delay 10sec. continuous output | |
| LED indicator | Red LED |
| LED Alarm - Flashing every 0.2sec. during off-delay approx. 10sec. | |
| Low battery - Light on 0.1sec. every approx. 5sec. | |
| Buzzer | Alarm - Sounds intermittently every 0.2sec. during off-delay 10sec. |
| Low battery - Sound 0.1sec. intermittently every approx. 5sec. | |
| Volume - 80dB or more 1m ahead (Silent setting is available by cutting internal jumper line) | |
| Sensitivity adjustment | Detection sensitivity (H [100%], L [50%]) |
| Detection timer (1sec., 6sec., 15sec., 30sec.,) | |
| Mounting position | Indoor (Ceiling or wall mount) |
| Wiring | Terminals |
| Appearance | ABS resin (white) |
| Ambient temperature | -10°C to +60°C without condensation |
| Battery performance may decrease under 0°C or beyond +40°C | |
| Product Dimensions | 120 mm (L) x 120 mm (W) x 45 mm (H) |
| Product Weight excluding battery | 152g |
| Packaging Dimensions | 187 mm (L) x 175 mm (W) x 67 mm (H) |
| Mass of unit packed | 330g |
| Warranty | 12 months limited Manufacturer’s warranty |
Warnings and Limitations of the High Sensitivity UV Flame Sensor:
1. All installations must be done by a suitable qualified technician
2. Under no circumstances may any of the components be modified.
WHAT’S IN THE BOX:
1 x Takex FS-1000E UV Flame Sensor with built-in sounder
Limitations:
The images shown are for illustrative purposes only. Actual product may vary slightly.