PRODUCT INFORMATION
The Takex PB-IN-200HFA Intelligent IR Quad Beams 200m is especially designed for outdoor protection with a single set capable of protecting up to 200m, or multiple sets extending to perimeters several kilometers long.
By synchronizing 16 beam paths between Transmitter and Receiver, the PB-IN-200HFA offers unrivalled stability in perimeter security. Coupled with channel separation and environmental (anti-fog) circuitry, the PB-IN-200HFA is the ultimate in outdoor perimeter intruder detection.
The PB-IN-200HFA beams are equipped with many features which provide a wide choice of field selectable options. These options result in considerable flexibility for a variety of application requirements.
Whether securing domestic, commercial, and industrial property, or protecting high-risk assets and critical infrastructure, the high-performance PB-IN-200HFA Quad Beams remain the quintessential choice for precise, dependable outdoor detection.
Product Code: PB- IN-200HFA
FEATURES OF THE PB-IN-200HFA PHOTOELECTRIC BEAM SENSORS:
- 4 x Synchronized high power beams
- 4 x Selectable beam channels to prevent crosstalk
- Environmental monitoring circuit
- Double modulation for unsurpassed light immunity
- Auto-gain lock (AGL)
- 50,000 lux sunlight immunity
- Vivid internal body stickers aid beam alignment procedure
- IP55 housing
SPECIFICATIONS OF THE PB-IN-200HFA PHOTOELECTRIC BEAM SENSORS:
Type | Quad Beam |
Detection system | Near infrared beam interruption system (TR-RE 4 beams simultaneous interruption) |
Infrared beam | Double modulation pulsed beams by LED |
Detection distance | Outdoor 200m or less |
Max. arrival distance | Tenfold 2000m |
Frequency Selection | 4 Channels |
Response time | 50msec. to 700msec. variable (Standard: 50msec.) |
Supply voltage | 12V to 30V DC (non-polarity) |
Current consumption | 85mA or less at protection (max. 120mA or less) |
Alarm output | Dry contact relay - NO or NC (selectable) |
Reset - Interruption time + off-delay (approx. 1.5sec) | |
Contact capacity - 30V (AC/DC) 1A or less | |
Environmental output | Dry contact relay - NO or NC (selectable) |
Contact operation - Output when weather condition gets worse | |
Contact capacity - 30V (AC/DC) 1A or less | |
Tamper output | Dry contact relay - NC |
Contact operation - Output when receiver cover is detached | |
Contact capacity - 30V (AC/DC) 0.1A or less | |
LED indicator | Red LED (receiver) |
・Lights when an alarm is initiated | |
・Lights when beam reception is attenuated | |
Functions | Modulated beam frequency selection, Tone indicator, Environmental module, Beam power selection, Alarm memory indication, Programmed AGC, Auto-gain lock function, Monitor jack. |
Adjustment | Horizontal: +/-90° | Vertical: +/-10° |
Mounting position | Outdoor |
Wiring |
Terminals |
Appearance | Resin (wine red) |
Ambient temperature | -35°C to +66°C |
IP Rating | IP55 |
Product Dimensions Transmitter | 105 mm (L) x 105 mm (W) x 390 mm (H) |
Product Dimensions Receiver | 105 mm (L) x 105 mm (W) x 390 mm (H) |
Product Weight Transmitter | 1200g |
Product Weight Receiver | 1300g |
Packaging Dimensions | 470 mm (L) x 245 mm (W) x 135 mm (H) |
Mass of unit packed | 3425g |
Warranty | 12 months limited Manufacturer’s warranty |
Warnings and Limitations on the PB-IN-200HFA Photoelectric Beam Sensors:
1. All installations must be done by a suitable qualified technician
2. Under no circumstances may any of the components be modified.
WHAT’S IN THE BOX:
1 x Takex PB-IN-200HFA Intelligent IR Quad Beams 200m
Limitations:
The images shown are for illustrative purposes only. Actual product may vary slightly.