PRODUCT INFORMATION
The Centurion Photon II Semi Wireless Safety Gate Beams are a set of infrared gate safety beams with a wireless transmitter.
Photon II makes short work of achieving a safe automation system for even the most challenging of installations, no more tunneling under the driveway as the wireless transmitter only requires two AA batteries (included in the kit) to deliver a minimum of two years of reliable operation.
The Photon II gate beams are only 50mm wide, making them unobtrusive and aesthetically pleasing with a sleek, slimline and elegant design.
FEATURES OF THE PHOTON GATE BEAMS:
- The transmitter is wireless and battery-operated saving time and money
- Two year battery life using two AA Alkaline batteries (included)
- Thirty meter operating range that is ideal for almost any entrance gate.
- Fully ant-proof and weather-resistant enclosure for greater reliability
- Transmitter provides audible feedback for easy setup and battery-low indication
- Low power consumption throughout the system for greater efficiency
- Installer Mode with audible feedback makes alignment much easier
- Elegant slimline construction and is only 50mm wide
- Compatible with Intruder-detection Alarms for enhanced perimeter security
SPECIFICATIONS OF THE PHOTON GATE BEAMS:
| Power supply - Transmitter | 2 x AA Alkaline Batteries (Supplied) (Only replace with AA Alkaline batteries; do not use rechargeable batteries with this product) |
| Power supply - Receiver | 12 - 24V AC or 12 - 30V DC |
| Power consumption | 30mA @ 12V DC |
| Battery life | > 2 years |
| Battery low indication | Audible beep |
| Specified operating distance | 30m |
| Alignment | Automatic - 1m² @ 10m (circular area - assumes parallel surface) |
| Maximum Operating Distance Photon SMART Receiver to SMART Controller | 10m |
| Output contact | Fail-safe, N/C and N/O, potential free contact |
| Output contact rating | 3A @ 30V DC Non-inductive |
| Operating temperature | -15°C to 65°C |
| Operating humidity | 0 - 90% non condensing |
| Housing material | ABS |
| Lens material | PC |
| Degree of Protection | IP54 |
| Dimensions - Receiver | 50 mm (L) x 40 mm (W) x 130 mm (H) |
| Dimensions - Transmitter | 50 mm (L) x 40 mm (W) x 130 mm (H) |
| Product Weight | |
| Packaging dimensions | 75 mm (L) x 60 mm (W) x 140 mm (H) |
| Mass of units packed | 239g |
| Warranty | 24 month carry in Manufacturers warranty |
Maintenance
• Ensure that the unit is always clean and free from obstruction.
• Beams should be checked periodically to ensure they are aligned.
Warnings and Limitations on the Phonton II Gate Beams:
• All installations must be done by a suitably qualified technician.
• Product must be used for its intended purpose and under no circumstance may any of the components be modified
• Only replace with AA Alkaline batteries, do not use rechargeable batteries with this product.
WHAT'S IN THE BOX:
1 x Centurion Photon II Semi Wireless Safety Gate Beams
Limitations:
The images shown are for illustrative purposes only. Actual product may vary slightly.