PRODUCT INFORMATION
The D5 SMART is a domestic and light industrial operator designed to open and close sliding gates weighing up to 500kg. All the most innovative technological features
Centurion D5 SMART Kit has a custom designed gearbox moulded from robust engineering polymers, coupled to a powerful 24V DC motor, provides fast and reliable automation for entrances to homes and small housing estates.
The system operates off two 12V 7.2AH Securi-Prod batteries (included) housed inside the operator using a switch-mode charger to maintain the batteries in a fully-charged state. The batteries provide critical power failure protection.
A non-contact Hall Effect Sensor was selected to ensure reliability and positional accuracy. The Hall Effect Sensor is highly resistant to dust, oil, dirt or insect ingress, therefore ensuring that the D5 SMART opens and closes gates reliably and accurately.
Features
- Interactive graphic user interface via a smartphone application
- Automated setup of gate endpoints (limits)
- Independently-adjustable motor speed in both opening and closing directions
- Fail-safe collision detection and auto reverse (adjustable sensitivity)
- Smooth, adjustable start/stop (ramp-up/ramp-down)
- Multiple operational modes
- Selectable, adjustable Auto close
- Pedestrian (partial) opening
- Positive Close Mode
- Independent safety inputs for opening and closing beams
- Automatic beam test for both opening and closing beams
- Advanced lightning/surge protection
- Onboard NOVA code-hopping radio receiver with full channel-mapping capability for up to 1500 remote buttons
- Advanced diagnostic features, measuring and monitoring controller hardware, battery charger, electric motor, override sensor, optional origin sensor, battery condition under load as well as external accessories connected to the D5 SMART
- Vibration sensor that can be connected to a third party device(alarm) to notify you in the event that the gate motor is being tampered with
Specifications
Brand | Centurion |
Model | D5 SMART |
Compatible remotes | Nova 1 Button, 2 Button and 4 Button(2 Included) |
Compatible backup batteries | Securi-Prod 12v 7.2Amp(2 Included) and Securi-Prod 12V 8Amp batteries |
Compatible controller PCB | SmartX controller |
Compatible Charger PCB | D5 SMART Charger PCB Assembly |
Compatible antitheft bracket | D5 SMART Bracket |
Compatible safety beams | Photon SMART Wireless Beams, i5 Wired Beams and Photon Semi Wireless Beams |
Compatible rack | Raz Rack(Included), Steel Rack and Angle Steel and Nylon Rack |
Compatible cover | D5 Smart Replacement Cover |
Input voltage | 90V - 240V AC ± 10% @ 50Hz *1 |
Current consumption (Mains) | 200mA |
Battery charger current output | 1.3A |
Duty cycle - Mains present | 50% |
Motor voltage | 24V DC |
Motor power supply | Battery-driven (Standard Capacity - 2 x 12V 7.2Ah) |
Current consumption (motor at rated load) | 13A |
Motor push force - starting | 30Kgf |
Gate mass - maximum | 500Kg |
Gate length - maximum | 100m |
Drive Pinion | 17T Module 4 |
Collision Sensing | Electronic |
Operating temperature range | -15°C to +50°C |
Onboard receiver type | Code-hopping multichannel receiver with selective add and delete |
Receiver code storage capacity | 1500 Remote buttons |
Receiver frequency | 433.92Mhz |
Degree of protection | IP55 |
Gate motor dimension | 275mm(l) x 181mm(w) x 373mm(h) |
Packaging dimensions | mm(l) x mm(w) x mm(h) |
Mass of unit packed | Kg |
Warranty | 24 Months carry-in product manufacturer's warranty |
Warnings and limitations
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.
What's in the box
1 x D5 SMART Gate Operator
1 x Base Plate
2 x 12V 7.2Ah Securi-Prod Batteries
2 x Centurion Nova 4 Button Remotes
8 x 500mm Centurion Raz Rack(4 meters)
1 x Manual