Home / Collections / All Products / Centurion 500mm Nylon RAZ Rack For Sliding Gate
Centurion 500mm Nylon RAZ Rack For Sliding Gate
Centurion 500mm Nylon RAZ Rack For Sliding Gate
Centurion 500mm Nylon RAZ Rack For Sliding Gate
Centurion 500mm Nylon RAZ Rack For Sliding Gate
Centurion 500mm Nylon RAZ Rack For Sliding Gate
Centurion 500mm Nylon RAZ Rack For Sliding Gate

Centurion 500mm Nylon RAZ Rack For Sliding Gate

R 74.00 Incl. VAT

Available to order online or collect at 6 Cosmic Street Linbro Park, Sandton, 2090 (Map)

PRODUCT INFORMATION

The Centurion 500mm Nylon Raz Rack is ideal for replacing sections of the pre installed Raz Rack or perhaps extending the length of the rack.

APPLICATIONS
Suitable for sliding gates not exceeding 500kg and can be fitted with the following motors:
 Centurion D2
• Centurion D3
• Centurion D5
 Centurion D5 Evo
 Centurion D5 Smart
 ET Drive 300
 ET Drive 500

FEATURES
• Mounting holes are slotted for easy adjustment
• Interlocking pieces can easily be removed and replaced
• Universal for most sliding gates
• Silent gate operation

SPECIFICATIONS

Brand Centurion
Rack type Interlocking
Material Nylon
Length 500mm
Rack dimensions 500mm(l) x 30mm(w) x 53mm(h)
Package dimensions 525mm(l) x 32mm(w) x 55mm(h)
Mass of unit packed 350g
Warranty Manufacturers Carry in product warranty

INSTRUCTIONS FOR USE

 MAINTENANCE AND CARE
• Check that all interlocking pieces are properly secured to the gate
• Inspect nylon teeth for worn out or broken tooth and replace sections if necessary

WARNINGS AND LIMITATIONS
• Ensure that the correct spacing is applied between the motor pinion and the rack to ensure a smooth opening and closing of the gate. Incorrect spacing will either result in pressure on the motor and gearbox when the spacing is to little or damage to the rack when the spacing is too much as the pinion will strip the rack or break pieces off.

WHAT'S IN THE BOX
1 x 500mm Centurion Nylon Raz rack
3 x Tex screws (8 x 25mm) 

Section