PRODUCT INFORMATION
The Nemtek High Volt Easy Fence Tester works with a timed light that changes its flashing rate with the change of voltage on the fence. The slower the rate the lower the voltage.
The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.
Product code: TL-EFT
FEATURES OF THE FENCE TESTER:
- Includes clips to connect the wire or poly tape
- Indicates power on the fence for peace of mind
- Visible from up to 1km at night and 100m during the day
- No batteries required
- Uses minimal power from the fence
- The frequency of the flashing LEDs indicates the amount of energy on the fence. The longer the period between flashes, the lower the voltage on the fence
- Highly visible LEDs allow for a 160-degree viewing angle. This allows the light to shine into the secure area only
- Can operate from 0.9kV to 12kV
- Can be used with most electric fence energizers
SPECIFICATIONS OF THE FENCE TESTER:
| Material | Plastic and water-tight compound |
| Steel wire connectors | Black Fence Clips |
| Waterproof Housing | IP66 |
| Flashing Rates | Flashing normally rate over ~7.5kV |
| Flashing at 25% slower than normal between 7.5kV~3kV | |
| Flashing at 50% slower than normal between 3kV~2.5kV | |
| Flashing at 75% slower than normal when less than ~2.5kV | |
| Product Dimensions | 83mm (L) excluding clamps and cable x 23mm (W) x 20mm (H) |
| Product Weight | 85g |
| Packaging Dimensions | 110mm (L) excluding clamps and cable x 70mm (W) x 30mm (H |
| Mass of unit packed | 100g |
| Warranty | 12 months limited Manufacturer’s warranty |
WHAT’S IN THE BOX:
1 x Nemtek High Volt Easy Fence Tester
Limitations:
The images shown are for illustrative purposes only. Actual product may vary slightly.
Section
Drop element here!