The Nemtek Electric Fence High Volt Timed Light Blue is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind.
The frequency of the flashing LEDs indicates the voltage level on the fence. The longer the period between flashes, the lower the voltage on the fence. The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage.
Designed for stainless steel wire only.
Product code: SR-FLTLSS
FEATURES OF THE TIMED FENCE LIGHT (STAINLESS STEEL):
- Blue fence light for stainless steel wire
- Visible from up to 1km at night and 100m during the day
- No batteries required – uses minimal power from the fence
- Highly visible LEDs allow for a 160-degree viewing angle. This allows the light to shine into the secure area only
- Can operate from 0.9kV to 12kV
- Can be used with most electric fence energizers
- Indicates power on the fence for peace of mind
SPECIFICATIONS OF THE TIMED FENCE LIGHT (STAINLESS STEEL):
|Plastic and watertight compound
|Steel wire connectors
|Stainless Steel (Blue housing)
|Flashing normally rate over ~7.5kV
|Flashing at 25% slower than normal between 7.5kV~3kV
|Flashing at 50% slower than normal between 3kV~2.5kV
|Flashing at 75% slower than normal when less than ~2.5kV
|83mm (L) excluding wires x 23mm (W) x 20mm (H)
|295mm (L) x 105mm (W) x 60mm (H)
|Mass of unit packed
|12 months limited Manufacturer’s warranty
WHATS IN THE BOX:
1 x Nemtek Electric Fence High Volt Timed Light Blue
The images shown are for illustrative purposes only. Actual product may vary slightly.